MC Plus

Features
4, 6, 8, 12, 18, 24, 30, 36 and 42 stations
4 independent programs that can run simultaneously
3 start times for programs 1, 2 and 3. Two start times for
program 4
Program 4 can operate in continuous cycle with a delay
time between loop cycles (from 1 min. to 24 h.)
Watering time of each loop cycle (program 4)
from 1 min. to 24 h. or 1 sec. to 24 min.
Watering time ranges from 1 minute to 24 hours for
each station, with 1 minute increments
Programmable delay between stations
(from 1 sec. to 4 min.)
Programmable valve test. Opens all stations
from 1 to 9 minutes, without affecting the program
Permanent memory
Water Budget. 1 to 255% in 1% increments
Accepts two sensors: start and stop
16 day watering calendar
Automatic, semi-automatic or manual start
Stacking Program
Truly Programmable Rain Off. Programmable from
1 to 7 days
The display indicates the operating station
Master Valve/Pump start circuit
Weather-resistant steel, locking cabinet
Built-in transformer
9 V alkaline backup battery to operate clock for 30 days
Self diagnostic circuit breaker identifies and overrides an
electrical malfunction of a valve.
P.S.: Several MC-Plus can be connected in sequence according
to a Mastter-Slave layout

Specifications
Input, 220VAC 50Hz
Max. output per station: 24 VAC, 1,24 Amp.
Max. total controller output: 24 VAC, 1,8 Amp.
(including master valve).

Code
MC-4-PLUS-B-E 4 Stations (built-in transformer)
MC-6-PLUS-B-E 6 Stations (built-in transformer)
MC-8-PLUS-B-E 8 Stations (built-in transformer)
MC-12-PLUS-B-E 12 Stations (built-in transformer)
MC-24-PLUS-B-E 24 Stations (built-in transformer)
MC-30-PLUS-B-E 30 Stations (built-in transformer)
MC-36-PLUS-B-E 36 Stations (built-in transformer)
MC-42-PLUS-B-E 42 Stations (built-in transformer)